The Metravi 1811 Digital ELCB RCCD Tester with Current rating up to 500mA, Auto Ramp,Phase Switch, Reads Disconnection Time, Battery-Powered

Features:

• Suitable for Use on 230V/50Hz single-phase line (operating voltage: 195~253V);
• Adopts Micro-Processor Chip to maintain high accuracy, reliability  and stability;
•  Wiring Check: three –LED indication When P-E and P-N green LED are on and red LED is off, the wiring is correct; otherwise it indicates wrong wiring(reverse P and N or bad grounding);
•  Phase Angle Selection: The tests can be performed at positive 0 or negative 180 phase angle.
• Over-Load Indication: “OL mS” shows when trip time exceeds Max. test time
• Auto Data Hold: The test results will be maintained for a while after the tests finishes.
• Auto Ramp Test: Test trip current and trip time simultaneously
•  Power-Off Warning Indication: The buzzer alarms after operating  for 3minutes;
• Battery Powered
• Fused Protection
• Double or Reinforced Insulation for safe design.
• Trip Current Setting: 10 / 20 / 30 / 100 / 300 / 500mA
• Confirms to IEC 61010-1 CAT III 300V, IEC 61557-1,5 and IEC 61010-2-31

What's Included In This Package:

• 1x Metravi 1811 Digital ELCB Tester
• 1x Test lead (1.5 meters)
• 1x Instruction manual
• 1x Shell/strap/cloth bag
• 6x Alkaline AA batteries

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.