The Fluke 1630 is a MUST HAVE for those who are intent on improving the reliability of their systems and making it impervious to impulse damage. The Fluke 1630 is easy to use, highly accurate and an industry standard”. The 1630-2 FC clamp measures earth ground loop resistances for multi-grounded systems using the dual-clamp jaw.

This test technique eliminates the dangerous and time-consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations for auxiliary test stakes. You can also perform ground tests in places that were previously difficult: inside buildings, on power pylons or anywhere you don't have access to soil to place auxiliary test stakes.

Earth Ground AC Leakage Current Measurement:

• Identify ac leakage currents without disconnecting the earth ground stake from the grounding system–ideal for system troubleshooting.
• Rugged heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments.

Logging Measurements:

• The earth ground clamp saves time by automatically recording data at pre-set intervals
• Saves up to 32,760 measurements in memory at the set logging interval.
• Saves time by recording and storing measured values.
• Alarm Threshold: User-defined high/low alarm limits, for rapid measurement evaluation.
• Band-pass filter: Selectable band-pass filter function removes unwanted noise from the ac leakage current measurement.

Fluke Connect® Wireless System:

• The 1630-2 FC supports the Fluke Connect Wireless System connects the clamp with an app on your smartphone or tablet (may not be available in all regions).
• You can save these measurements, and images to Fluke Connect Cloud storage and share with your team.
• Maximize uptime and make confident maintenance decisions with data you can trust and trace.
• Access baseline, historical and current measurements by asset.
• Share your measurement data using ShareLive™ video calls and emails.
• The 1630-2 FC is part of a growing system of connected test tools and equipment maintenance software. Visit the website to learn more about the Fluke Connect system. Find out more at flukeconnect.com.

Features:

The Fluke 1630 is a MUST HAVE for those who are intent on improving the reliability of their systems and making them impervious to impulse damage. The Fluke 1630 is easy to use, highly accurate and an industry-standard”- verified purchaser.

• Test the grounding components of equipment in hard-to-reach spaces, including areas that are indoors or fully paved and do not permit driving auxiliary test stakes.
• AC Leakage Current Measurement: Identify AC leakage without disconnecting your earth ground stake from the grounding system
• Rugged: Heavy-duty clamp jaw stays in alignment and calibration on tough job sites
• Logging measurement: Saves up to 32,760 measurements in memory.

What's Included In This Package:

• 1630-2 FC Earth Ground Clamp
• Hard case
• Loop resistance standard
• 4 AA batteries
• Safety information guide
• Quick reference guide

Electrical Specifications:

In Ground Resistance measurement mode, with backlight turned off, and RF mode turned off
LCD	Digital reading	9999 counts
	Refresh rate	4 per second
Operating humidity	Non condensing (<10 °C) (< 50 °F)
	≤90% RH (at 10 °C to 30 °C [50 °F to 86 °F])
	≤75% RH (at 30 °C to 40 °C [86 °F to 104 °F])
	≤45% RH (at 40 °C to 50 °C [104 °F to 122 °F])
	(Non condensing)
Display reading specification with standard loop resistance
Input (Ω)	Minimum	Maximum
0.474	0.417	0.531
0.5	0.443	0.558
10	9.55	10.45
100	96	104
Safety
General	IEC/EN 61010-1: Pollution Degree 2 IEC/EN 61557-1
Measurement	IEC/EN 61010-2-032: CAT IV 600 V / CAT III 1000 V
Current clamp for leakage current measurements	IEC/EN 61557-13: Class 2, ≤30 A/m
Resistance to earth	IEC/EN 61557-5
Effectiveness of thepProtective measures	IEC/EN 61557-16
Electromagnetic compatibility (EMC)	International	IEC/EN 61326-1: Portable Electromagnetic Environment
		CISPR 11: Group 1, Class B, IEC/EN 61326-2-2
	Korea (KCC)	Class A equipment (Industrial Broadcast & Communications Equipment)
	USA (FCC)	47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103
Wireless Radio
Frequency range	2412 MHz to 2462 MHz
Output power	<10 mW
Radio frequency certification	FCC ID:T68-FBLE IC:6627A-FBLE
General Specifications
Conductor size	40 mm (1.57 in) approximately
Dimensions (L x W x H)	283 x 105 x 48 mm (11.1 x 4.1 x 1.9 in)
Weight	880g (31 oz)
Warranty	One year
Earth Ground Loop Resistance
Range	Accuracy1  ± (% of reading + Ω)
0.025 Ω to 0.249 Ω	1.5% + 0.02 Ω
0.250 Ω to 0.999 Ω	1.5% + 0.05 Ω
1.000 Ω to 9.999 Ω	1.5% + 0.10 Ω
10.00 Ω to 49.99 Ω	1.5% + 0.30 Ω
50.00 Ω to 99.99 Ω	1.5% + 0.50 Ω
100.0 Ω to 199.9 Ω	3.0% + 1.0 Ω
200.0 Ω to 399.9 Ω	5.0% + 5.0 Ω
400 Ω to 599 Ω	10.0% + 10 Ω
600 Ω to 1500 Ω	20.00%
1  Loop resistance with no inductance, conductor centered and perpendicular to jaw
Earth ground leakage current mA
Autorange 50/60 Hz, True rms, crest factor CF ≤3
Range	Resolution	Accuracy1  ± (% of reading + mA)
0.200 mA to 3.999 mA	1 μA	2.0% + 0.05 mA
4.00 mA to 39.99 mA	10 μA	2.0% + 0.03 mA
40.0 mA to 399.9 mA	100 μA	2.0% + 0.3 mA
0.400 A to 3.999 A	1 mA	2.0% + 3 mA
4.00 A to 39.99 A	10 mA	2.0% + 30 mA
1 Applies to signal frequency 40 Hz to 1 kHz with filter set to OFF 40 Hz to 70 Hz with filter se to ON

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.